The new inlet method, distribution followed by mixing, first separates the fluid from the gas-liquid and then enters the gas-liquid distributor throug
The design of the flow channel reduces geometric abruptness, allows the fluid to develop more fully on both sides, reduces the uneven distribution of
The homogeneity and stability of the fluid distribution in the to structure is strongly influenced by the angle of infusion. For the side entry type,
If the baffle is too thick the rectification effect will not be obvious, too large an aperture will cause too much fluid to flow from the centre of th
The method of non-linear mapping of the structural parameters of the plate-fin heat exchanger is based on the combination of experimental data derived
When the location of the baffle is different, the vortex development Chengdu and buffering effect is inversely correlated, the existence of the best
The main factor affecting the uneven distribution of the two-phase fluid is the re coefficient of the inlet meteorological fluid, as the re coefficien
Due to the heat exchanger logistics distribution characteristics factors, there are a variety of different improvement measures, mainly divided into t
Two-phase fluids have a significant impact on the heat transfer performance of the heat exchanger fluid. Two-phase fluids make the inhomogeneity even
Problems such as the annual of the fluid in the laminar flow area, condensation under variable loads and changes in the density of the fluid with temp
