Home / All Air Separation tags /

Small air separation unit maintenance site

Small air separation unit maintenance site
Cutting pipe attention to measures to reduce the aluminum chips into the interior of the pipe, especially the vertical pipe cutting, should take measures to maintain the cleanliness of the interior of the pipe, bracket welding requirements full welding, after welding to go out of the surface of the weld oxide skin.
News of Small air separation unit maintenance site
More
Aug 26, 2020
On August 24, it was reported that Kaifeng DEAR air separation Industrial Co., Ltd. (hereinafter referred to as DEAR air separation) and Hanyuan Bilif
Aug 19, 2020
It was reported on August 17 that Kaifeng DEAR air separation Industrial Co., Ltd. (hereinafter referred to as Kaifeng DEAR air separation) and Gansu
Solutions of Small air separation unit maintenance site
More
2400/1000-type solution for small and medium-sized air separation plant in nonferrous industry
Formulate construction guidelines for non-ferrous metal intelligent mines and factories, and guide the construction of industry intelligent standardization. Reducing production energy efficiency and overall controllable cost, promoting the rapid iteration of production equipment and improving enterprise profits are the problems that need to be solved urgently in current industry. Recently, DEAR air separation cooperated with customers and signed a 2400/1000-type small and medium-sized air separation plant project, which was highly recognized by customers through reasonable scheme design.
Faq of Small air separation unit maintenance site
More
Pipe of small air separation unit before installation, check the orientation of the container orifice, the orientation of the valve inlet and outlet is correct. The pipe fittings should be thoroughly cleaned ten net and strictly degreased, while opening the welding bevels etc. The welded pipe must be brushed with clean stainless steel wire for a very short time before welding. In order to reduce the cold box pipe welding mouth, can be prefabricated in a clean plant, and later for the final dist...
Mar 26, 2026
Isentropic expansion is more effective than throttle expansion in terms of temperature effect and cooling capacity. Moreover, the expander can also recover part of the expansion work, which can improve the economy of refrigeration. However, the throttling valve is simple in structure, easy to adjust and can work in the gas-liquid two-phase zone. Especially when the initial temperature is low, the cooling capacity of throttling is enhanced, isentropic expansion is weakened and the gap between the...
Mar 10, 2022
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top