Brands of air compressor

When the power supply of the air separation unit of the molecular sieve adsorption purification process is resumed after the power failure, the operation should be conducted according to the following steps: 1) the possible influence on the mechanical equipment such as the air compressor when the power is suddenly cut off should be judged. If there is no influence, start-up preparation of the air compressor according to the operation specification of the air compressor; 2) check and confirm the switch state of the chain shutdown equipment valve; 3) check and confirm the alarm chain project of the air separation plant. Re-check and confirm the chain control of failure during power failure; 4) start the air compressor and air precooling system according to regulations; 5) start the molecular sieve adsorber according to regulations. Continue to complete the process before shutdown. If the downtime is long (more than 24 hours), the molecular sieve adsorber should recycle for one cycle; ...

With the continuous development of social economy and science and technology, the production scale of air separation equipment is getting larger. As an important part of the whole air separation equipment, automatic control system develops from the original instrument control system to PLC automatic control system, then develops to the DCS, CCS, SLS and AMS control systems which widely used nowadays. With the improvement of social awareness of energy and environmental protection, the advanced control system is used to realize the optimization of air separation equipment, and the control technology of automatic load changing to realize energy saving and consumption reduction is also emerged.