Biogas purification unit manufacturers

Shell and tube air separation heat exchanger is the most representative wall heat exchanger. It has a long history of application and is still dominant in all heat exchangers. Shell and tube heat exchanger is mainly composed of shell, tube bundle, tube sheet and head. Most of the shell is round, and there are parallel tube bundles inside. Both ends of the tube bundle are fixed on the tube plate. In shell and tube heat exchanger, there are two kinds of fluids for heat exchange. One kind of fluid flows in the tube, and its stroke is called tube side. The other flows outside the tube and its stroke is called shell side. The wall of tube bundle is the heat transfer surface. In order to improve the heat transfer coefficient of the fluid outside the tube, a certain number of transverse baffles are usually installed in the shell. The baffle can not only prevent the short circuit of the fluid and increase the velocity of the fluid, but also force the fluid to flow through the tube bundle man

The air separation column mainly includes main heat exchanger, liquefier, distillation column, condensing evaporator, etc. The main heat exchanger, condensing evaporator and liquefier are plate type of heat exchangers. It is a new type of all aluminum metal composite partition heat exchanger. The average temperature difference is small, and the heat exchange efficiency is as high as 98-99%. Distillation column is the unit of air separation. The types of column unit are classified according to the internal parts. The sieve plate column with sieve plate, the bubble cap column with bubble cap plate, and the packed column with packing material. The sieve plate is widely used in air separation distillation column because of its simple structure, easy manufacture and high efficiency. Packed column is mainly used for distillation column with diameter less than 0.8m and height less than 7m. Bubble column is seldom used because of its complicated structure and difficult manufacture. Turbine