Air separation unit cryogenic valve

The load regulation range of low pressure air separation unit is related to the regulating performance of feed air compressor, the regulating performance of expander and the structural characteristics of distillation column. At present, the flow regulation range of turbine air compressor with inlet guide vane is 75% to 100%, and that of turbocharged expander with adjustable nozzle is 65% to 100%. Next, the most important thing is to adjust the residual of the distillation column. At present, the load regulation range of distillation column with structured packing can reach 50% - 100%, while that of traditional sieve tray column is 70% - 100%. If the load is too low, it will cause liquid leakage because the speed of steam passing through the sieve is too slow. When oxygen is sufficient and the oxygen output needs to be reduced, first reduce the output of oxygen products, then reduce the air flow accordingly, and adjust the expansion air volume according to the main cooling level. The

Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation