Air compressor bidding

Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation

The water supply source of air cooling column in precooling system equipment is cooling water pump, and water cooling column is supplied by chilled water pump. Their structures and principles are described as follows: 1. Design structure: the most basic components inside the centrifugal pump are high speed impeller and fixed volute pump case. Generally, the impeller with several (4 ~ 12) backward curved blades is fixed on the pump shaft and driven by the motor to rotate with the pump shaft at high speed. The work done by these impellers will directly act on the liquid in the pump body, which is the energy supply source device of centrifugal pump. 2. Principle: after the centrifugal pump is started, the pump shaft directly drives the reverse curved impeller to move at high speed, squeezing the pre filled liquid between the reverse curved spaces of the blade to rotate. Under the high-speed centrifugal force formed by the movement of the pump shaft, the liquid moves radially from th