| Solution advantages |
|
1. Use imported centrifugal air compressor. 2. Precooling system The air-cooler unit assembled by the imported compressor has low power consumption, flexible cooling capacity adjustment and reliable performance. The system can cool the air to 7℃, effectively preventing the molecular sieve adsorber from carrying water accident. 3. Purification system Special molecular sieve for air separation is selected to make the CO2 content in the air less than 1PPm after the adsorber is released. Molecular sieve adsorber switches over for 8 hours, with less regeneration times and low power consumption. The switch valve of purification system adopts Japanese tooling products with reliable movement, leakage of 0 and switching times of more than 100,000. 4. Distillation column system Adopt single-stage rectification, waste gas expansion cycle. The heat exchange system composed of the main heat exchanger, the liquid purifier and the supercooler distributes the cooling amount reasonably, which effectively reduces the loss of liquefaction before air rectification, vaporization after liquid-air throttling and reheat shortage. Use high-efficiency convection distillation column. The fully immersed condensing evaporator adopts the explosion-proof design, which further enhances the safety and stability of equipment operation. Without a separate heating system, the distillation column can be heated, cooled, hydrops and purified in one breath. The operation is simple and fast, and the start-up time is less than 20 hours. Set up liquid nitrogen recharge system to shorten start-up. 5. Turbine expansion unit Expansion impeller is designed by NREC software, five-coordinate linkage CNC machine tool processing, gas bearing, fan braking, high entropy efficiency and reliable operation. Considering stability and reliability, fan braking is adopted. 6. liquid nitrogen storage and vaporization system Use storage tank self-pressurization to replace liquid nitrogen pump, which reduces investment and operates reliably. |
|
Product |
Output N m3/H |
Purity |
Outlet cold box pressure Mpa |
Temperature |
Note |
|
Nitrogen gas |
1500 |
≤3ppmO2 |
0.8 |
Normal temperature |
Precooling system |
|
Liquid nitrogen |
100 |
≤3ppmO2 |
Saturated |
|
|
Note: 1.1 measurement unit Nm3/H is measured at 0℃, 0.1013Mpa (A). It is called standard state quantity.
1.2 Operation Cycle (interval between two big heating): ≥2 years
1.3 heating and cooling time of the unit :~ 24-hour
1.4 start-up time of the unit (from the start of the expansion machine to the purity index of nitrogen products ):~ 20 hours
|
Supporting unit |
Unit |
|
1. Centrifugal air compressor 2. Air precooling system 3. Purification system 4. Booster turbine expansion unit 5. Distillation column system 6. Liquid storage system 7. Instrument control system 8. Electronic control system |
1 Set 1 Set 1 Set 1 Set 1 Set 1 Set 1 Set 1 Set |
