For short, air separation is a process of separating oxygen and nitrogen from air by means of deep freezing, adsorption and membrane separation, or ex
The amount of liquid-air evaporation depends on the nitrogen content of the distillate. The higher the nitrogen content, the lower the evaporation. At
Impeller is the core component of compressor. The leading compressor manufacturers in the world all implement technical blockade on the key manufactur
The use of air flow automatic heating, does not need any other energy. Generally, the maintenance cost is low. At the same time, it also responds to t
The expander is divided into pressurization end and expansion end. After emergency shutdown and planned shutdown, because the expansion end is in low
Three oil and two cloth is a kind of anti-corrosion method, which is generally used for direct buried anti-corrosion of buried pipelines. There are ma
Steam turbine: also known as steam turbine engine, it is a kind of rotary steam power plant. High temperature and high pressure steam passes through t
The basic components of the screw expansion power machine body are a pair of screws and the casing. The working steam first enters into the screw slot
In order to keep the frequency of power grid constant, the speed of steam turbine needs to be maintained in a certain range. The main valve opening of
1. The newly built air separation unit was fired on site when it was first filled with pearlite. A tube was directly sent to the top of the tower. It
Floating rate is an important index of water-saving performance of cooling tower. Large floating rate means more water consumption of cooling tower. T
1. Expansion air into the lower tower requires that the pressure of air out of the air compressor is much higher. 5 MPa (g), which is generally used i
