At the site of equipment installation, we may see a variety of operation methods. When we first met, we may be a little surprised. We may get used to...
Besides reducing air loss as much as possible, reducing equipment resistance to increase air volume and reducing loss of running cooling, incomplete l...
Answer: only when the quantity and state of materials entering and exiting the distillation tower and each stock of materials completely accord with t...
Switching heat exchanger flow oxygen generator, in order to achieve the self-cleaning of moisture and carbon dioxide, requires a large amount of dirt ...
The forced valve is opened and closed by the air source pressure pushing the piston. Its faults include the faults in the cylinder and the valve body....
In the switching heat exchanger, moisture and carbon dioxide cannot be completely and thoroughly removed. Although the remaining amount is very small,...
The whole low pressure oxygen generator has certain rectification potential because of the distillation section of the upper tower, so the air after e...
Answer: in the whole low-pressure air separation process, some are equipped with a liquid purifier, and some are equipped with two or even three liqui...
Answer: On the one hand, the expansion heat exchanger is to reduce the temperature of the air after expansion by utilizing the cooling amount of the n...
Solenoid valve controls the position of valve core through an electromagnetic coil to achieve the purpose of changing the flow direction of fluid, or ...
Nitrogen-water precooler is generally installed in all low-pressure air separation plant. It mainly uses the unsaturation of the water in the nitrogen...
Answer: The newly installed distillation column must be thoroughly heated and blown off before starting and returning to work after long-term parking....
