Home / All Air Separation tags /

Principle of oxygen and nitrogen production

Principle of oxygen and nitrogen production
Using air as material, oxygen and nitrogen are obtained by physical method. There are three kinds in industry, namely cryogenic air separation, molecular sieve air separation (PSA) and membrane air separation. The principle of oxygen and nitrogen production generally adopts the principle of pressure swing adsorption. The equipment includes air compressor, freeze dryer, air tank, oxygen nitrogen separation device, gas buffer tank, etc.
Video of Principle of oxygen and nitrogen production
More
Faq of Principle of oxygen and nitrogen production
More
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
Nov 11, 2020
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak.   From the quality point of view, when the sealing pressure is too high, there will be gas leakage into the pump through the labyrinth seal, resulting in the impeller with gas or even idling, resulting in liquid injection or pressure drop; when the air pressure before sealing is too low, there will be liquid oxygen leakage.   From the quantity point of view, when (p1-p3...
Oct 23, 2020
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top