Internal compression air separation process is a process form in which liquid products are pressurized by liquid pump in the cold box, and then sent o...
The Feed gas and cold source of the crude argon tower come from the main tower and return to the main tower, so the crude argon Tower and the main tow...
1) The station can only be built after the review and approval of relevant departments according to the regulations on the safety management of chemic...
The three-point temperature of the low temperature of the air separation tower is: T3 temperature refers to the temperature before the high pressure a...
A steel-making user of DEAR air separation set up their air separation plant in the early stage. At that time, due to the small amount of nitrogen req...
When the purity of the product decreases or the output decreases during the operation of the air separation plant, people will think of whether the he...
Molecular sieve is a kind of crystal of siovenate, which has many micropores with uniform aperture size. The skeleton is usually negatively charged, a...
To eliminate the vibration of the compressor, we generally start from the following ways: 1. The static balance and dynamic balance of moving parts s...
The air pressure test on site is mainly to check the air tightness of the air separation plant. The following problems should be paid attention to dur...
The air passes through the cooler or the switching heat exchanger. As the temperature decreases continuously, the moisture gradually flows out and dep...
Pressure dew point: after the wet air is compressed, the density of water vapor increases and the temperature also rises. When the compressed air cool...
The flow integrator is used together with the flow meter and accumulates the total amount of fluid flowing through the pipeline within a certain perio...
