Low Pressure Nitrogen Press

The design of the internal structure of the adsorber: the design of the internal structure of the adsorber includes the determination of the bed layer and various auxiliary structures, such as the design of the upper and lower filter, the guide valve, the pressing mechanism, the gas distribution device and so on. The adsorber can usually be divided into single bed and double bed, and the structure is shown in figure 3. Both the upper and lower vent of the two structures are equipped with filter and gas distributor. The single-layer bed structure is equipped with a screen hole plate and a cylinder compressing device on the molecular sieve adsorber. When the adsorber is working, the cylinder piston generates a lower thrust by differential pressure and compresses the molecular sieve through the screen hole plate, it avoids the phenomena that the molecular sieve is boiling and flowing and the filter screen is damaged due to the excessive airflow, thus prolonging the life of the molecula...

A steel-making user of DEAR air separation set up their air separation plant in the early stage. At that time, due to the small amount of nitrogen required by the process and in order to reduce the investment, the molecular sieve adsorption purification process of 1:1 oxygen and nitrogen was adopted. There was no water chiller equipped, and a large amount of crude nitrogen was extracted to the water cooling column to reduce the temperature of cooling water.