1. The requirements of molecular sieve adsorber, electric heater and other equipment in place are the same as those of air cooling column of pre cooli...
During the start-up phase, when the liquid volume accumulates in the condensing evaporator, the gas and liquid mixture will pass through the liquid ai...
When the cryogenic method is used for air separation, the whole process is carried out in closed containers and pipelines from the air compressor to t...
Small air separation equipment consists of air compressor, purifier, air separation Tower, expander, oxygen compressor and other main parts. Before st...
In order to reduce the installation cost of the equipment, more and more air separation users require the cold box to be assembled when delivered from...
The technical requirements of molecular sieve purifier include: 1. the manufacture, inspection and acceptance of the molecular sieve adsorption cylin...
1.The cold box foundation is composed of foundation body, water baffle, cold insulation layer and surface layer. 2.The surface of fractionator foun...
As for the oxygen generator in the flow of switching heat exchanger, in order to achieve the self-elimination of moisture and carbon dioxide, the amou...
Vacuum pump is a device that produces, improves and maintains vacuum in a certain enclosed space by various methods. Vacuum pump can be defined as a d...
Why do we need to balance the pressure when the molecular sieve adsorber is switching: (1) when the molecular sieve adsorber is switching, we need to ...
The steam heater uses overheated steam as the heat source, so it is easy to leak and pollute the heating medium in the process of use. Therefore, the ...
In the distillation column of air separation, the air is usually pre separated in the lower column, and then distilled into oxygen rich liquid air and...
