1. Workers must wear safety helmets properly when entering the construction site, because the construction site is often chaotic. Some equipment insta...
Internal compression air separation process is a process form in which liquid products are pressurized by liquid pump in the cold box, and then sent o...
There are mainly the following factors that affect the output of oxygen: 1) insufficient processing air volume. The reasons for the shortage of air vo...
Reducing the high pressure of small air separation equipment with medium pressure expansion machine can reduce the energy consumption of air separatio...
A steel-making user of DEAR air separation set up their air separation plant in the early stage. At that time, due to the small amount of nitrogen req...
The process of using nitrogen as the working medium of expansion machine is called nitrogen expansion. Nitrogen expansion is divided into pure nitroge...
The air pressure test on site is mainly to check the air tightness of the air separation plant. The following problems should be paid attention to dur...
If the automatic adjustment system of the liquid level of the air cooling tower fails, it is easy to cause water accidents of the air separation tower...
At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to...
Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit...
At present, most of the cooling materials filled in the cooling box of the air separation plant are Pearl sand. Pearl sand is a particle with small ap...
Molecular sieve (also known as synthetic zeolite) is a kind of microporous crystals made up of SiO and AIO sihedron and the frame structure. There are...
