The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the ...
Pure argon Tower and the condensation evaporator composite should be met: 1. Pure argon tower and condensing evaporator are manufactured, inspected a...
The technical maintenance of power equipment includes: (l) daily spot inspection and round inspection by the operating personnel of power station acco...
When air enters into the cooler (or switching heat exchanger) through the last stage cooler of air compressor and nitrogen water precooler, the conten...
The carbon molecular sieve of Nitrogen generator has high requirements on the quality of compressed air, while the compressed air contains a large amo...
Carbon molecular sieve (CMS) is a new type of non-polar adsorbents, which has the performance of absorbing oxygen molecules in the air under normal te...
In the internal compression process air separation plant, we generally select the the multistage centrifugal pump as the liquid nitrogen pump. In orde...
At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to...
The actual running current of 132kw-8 electric motor is 220A ~ 240A, four air compressors share one air storage tank, and the actual pressure required...
Molecular sieve adsorber can adsorb water and carbon dioxide at normal temperature, and at the same time, it can adsorb hydrocarbon such as acetylene....
The air separation equipment generally uses rivers, lakes or underground water as cooling water. This kind of water usually contains suspended solids ...
The steam heater uses overheated steam as the heat source, so it is easy to leak and pollute the heating medium in the process of use. Therefore, the ...
