There are mainly the following factors that affect the output of oxygen: 1) insufficient processing air volume. The reasons for the shortage of air vo...
The three-point temperature of the low temperature of the air separation tower is: T3 temperature refers to the temperature before the high pressure a...
Air cooling tower is also a hybrid heat exchanger. In order to make the cooling water fully contact and strongly mix with the air to enlarge the heat ...
Liquid air and liquid nitrogen supercooler uses nitrogen as cold source to cool liquid air or liquid nitrogen. There are Pipe type and plate type cool...
To eliminate the vibration of the compressor, we generally start from the following ways: 1. The static balance and dynamic balance of moving parts s...
The main components in the air are nitrogen and oxygen. By selecting the adsorbents with different adsorption selectivity for nitrogen and oxygen, the...
Before the automatic valve is installed in the automatic valve box, it must be disassembled and washed clean, and the oil must be removed with clean a...
The running cycle of small-sized air separation plant is shorter than that of large-sized air separation plant, which is because small-sized air separ...
Carbon molecular sieve (CMS) is a new type of non-polar adsorbents, which has the performance of absorbing oxygen molecules in the air under normal te...
Water cooling tower is a hybrid heat exchanger. The relatively high temperature cooling water (about 35℃) from the air cooling tower flows down from t...
1) cleaning method welding slag, rust, slag and so on in the pipeline will be blocked or stuck in the throttle, guiding position and the balance hole ...
Nitrogen is the main component of air in the universal pressure conversion and adsorption equipment. It is colorless, odorless, non-toxic and non-comb...
