Basic requirements for steel structure of large air separation plant

All low pressure air separation units are usually equipped with nitrogen water precoolers. It mainly uses the unsaturation of nitrogen in sewage to evaporate part of water. As the water evaporates, it absorbs the latent heat of vaporization to lower the temperature of the cooling water, which is then used to cool the treated air and lower the temperature of the air entering the column. Therefore, it includes air cooling column and water cooling column. The basic purpose of setting up nitrogen precooler is to reduce the air temperature entering the air separation column and avoid the temperature fluctuation greatly. Because the inlet air temperature directly affects the operation conditions of the switching heat ex-changer and distillation column, as well as the economy of the whole air separation unit. In the design, the air temperature entering the column is usually set at 30 ° C. When the inlet temperature of the column is higher than the design index during operation, the throttl

This project we use nitrogen booster cycle in the design process of oxygen compression fast variable load process. The process in small air separation unit before the air leaves the molecular sieve is the same as the conventional process, and the air after leaving the molecular sieve purification unit is cooled in the main heat exchanger and then enters the pressure tower. The flow of the nitrogen booster cycle is ...