Home / All Air Separation tags /

Air compression

Air compression
The technology of air compression was first used by the Greek ktezibios. He made a compressed air cannon two thousand years ago. Rubber is used to drive the piston in the barrel to compress the air to increase the force and produce a long range of artillery. The air is released after air compression. Because the work is done on it during air compression, the temperature is different from that before compression in the case of no heat dissipation.
Albums of Air compression
More
Faq of Air compression
More
Nitrogen is the main component of air in the universal pressure conversion and adsorption equipment. It is colorless, odorless, non-toxic and non-combustible gas under room temperature and atmospheric pressure, and its boiling point is-195.8 ℃, its chemical property is not active. In addition to synthetic ammonia, nitrogen is usually used as protective gas in industries such as metallurgy, chemical industry, coal, food, medicine, electron, magnetic material, transportation, heat treatment, tire, thermoelectricity, aviation, etc. Special pressure conversion nitrogen absorption equipment for petroleum and petrochemical industry chemical industry is the industry with the largest application of nitrogen air separation equipment. Currently, the most widely used one is: PVC, with a purity of 99.5% and a large flow rate. Polypropylene (PE) has a purity of 99.9% and a large flow rate. The application of nitrogen in this product is divided into two parts. One is that 99.9% nitrogen (small am...
Apr 27, 2025
Reducing the high pressure of small air separation equipment with medium pressure expansion machine can reduce the energy consumption of air separation equipment. Here is a simple analysis of the influence of the temperature before the expansion machine on the high pressure. Under the condition that the total cooling loss and the gas temperature before expansion are fixed, from the perspective of the heat balance of the total unit, increasing the high pressure can reduce the expansion gas; but from the perspective of ensuring the working condition of the cold section heat exchanger, with the increase of high pressure, it is required to increase the expansion amount and reduce the air flow into the cold section heat exchanger. Therefore, the selection of working pressure and expansion amount of the process should meet both requirements. When the total cooling loss and working pressure of the process remain the same, increasing the temperature of expansion forward gas can increase the...
Feb 27, 2024
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top